A new working week begins today. We had quite a lot of rain last night, but it had stopped by this morning, and the sun was starting to come out. It was still humid and damp after the rain, though the humidity dropped quite a bit by the afternoon. With those conditions in mind, I spent the morning cutting out parts of the 4-sun boxes and checking the mechanisms of the 5-sun boxes. These boxes are now almost finished, so my main work is on the Mame puzzle boxes and the 4-sun boxes. At the same time, I am also preparing to make the 3-sun cube puzzle boxes.
I am deciding on the design and details of this batch of 3-sun cube puzzle boxes as I make them. Today, I prepared the wood that will form the base of the top and bottom panels. These panels need extra drying time, so I am preparing them early. I plan to add decorative details to them later. The woods I used are camphor and jindai katsura, an ancient wood preserved underground. Jindai katsura is especially rare, and I happened to have some suitable pieces for this project. However, it is very soft, so I decided to use it only in selected areas rather than across the whole surface.
I am also thinking of making the mechanism a little different this time. It won’t be a major change, but I plan to make it slightly different from the usual mechanism. As for the number of steps, I would like to go above 20 this time. Since I am only making a small batch, I thought I could add a few more steps.This will be my first time trying this approach. It is not unusual, but since I have never used it myself, I’m curious to see how it turns out. I’ll share more when the boxes are finished. All the outer panels will be made from solid natural wood this time. Compared with panels covered with decorative sheets, solid wood can be more prone to movement, so I plan to take a little more time with this batch.

