Comparing Groove Widths

My works

It was very windy and dry again today. The air was so dry that I could watch a board warp right before my eyes after setting it down. The surface of the wood was losing moisture that quickly. Dry air is good for some parts of making puzzle boxes, but when it gets this dry, I have to be extra careful. I still managed to get a few things done in the workshop today.

I’ve had a lot to make lately, but things are starting to settle down a little. Right now, I’m working on the 4-sun puzzle boxes and starting a new batch of 3-sun cube puzzle boxes. Today I picked up where I left off yesterday and finished gluing the sliding key panels onto the 4-sun puzzle boxes. That completes the assembly. I’d like to start the finishing work soon, but I’ll have to be careful if this dry weather continues. When the air is this dry, the surface of the wood loses moisture quickly, and the sliding key panels can warp. I think the boxes are at their most delicate just before I apply the finish.

After that, I did a little work on the 3-sun cube puzzle boxes. I’m still getting the parts ready, so today I worked on the long side panels and the top and bottom panels. I’m planning to make these boxes with 21 steps. This time, I tried making the grooves that guide the Aruki (sliding panels) 3 mm wide. The Aruki panels for this design are 6.5 mm thick, and I would usually cut the grooves 2.4 to 2.5 mm wide. I wanted to see if a slightly wider groove would help the panels slide more steadily. As you can see in the photo, a wider groove leaves less wood between the groove and the edge of the board. With a 6.5 mm panel and a 3 mm groove, that strip is about 3.5 mm wide, almost the same width as the groove itself. My main concern is where the grooves in the top and bottom panels cross the grooves on the sides. A wider groove leaves a smaller square of wood at the corner, which can chip more easily. Since I made the grooves wider this time, I decided to keep them only about 1 mm deep. I think that will help keep the corners strong. I’ll write about how the panels slide once the boxes are finished.
Have a great weekend!

Shop Available Puzzle Boxes
Copied title and URL